Suction Filter With Check Valve PSB Series

PSB series suction filter can be mounted on the top,at the bottom or at the side of the tank,and the inlet port should be fixed below the fluid level.The check valve will close automatically to prevent oil flowing out from the tank when the element is taken out for replacement. Pressure gauge and other indicators can be installed according to actual requirement.
Operating temperature: -25?~120? Setting pressure of indicator: -0.3bar
Filter housing material:aluminium
Working substance: mineral oil, emulsion, water-glycol, phosphate ester hydraulic oil(resin-impregnated paper only for mineral oil)
Suction Filter With Check Valve PSB Series